Network administrators in the financial industry
face increasing pressure to secure financial data both at rest and in
motion because of which he have to tradeoffs between performance and
EncrypTight™ can eliminate these trade-offs by
protecting all forms of sensitive information, including data in
motion, voice, and video, without impacting network performance or
without time-consuming VPN tunnels
Encrypt any network topology from simple
point-to-point to full mesh and cloud networks without VPN tunnels
security without impacting availability or visibility -Separate
access and permissions for security and network teams. -Enable
automatic key rotations and Persistent Authentication -Securely
connect to public and private clouds.
Save Time -Set up
and manage in only minutes. -Enable secure green zones to reduce the
scope of compliance audits. -Monitor
and troubleshoot without deactivating encryption.
Reclaim Performance -EncrypTight
replaces IPsec tunnels
and runs at the full line rate. -Enable secure load balancing, disaster
recovery and high availability. -Get support for VoIP, video,
Why you should
encrypt data in motion
Security is more than PCI
In addition to PCI, Governments have
their own data protection requirements, which include audit and fine
structures. For financial companies, this means that companies that
fail to protect their customers’ data will find a long line of
auditors, regulators, and bureaucrats waiting to levy fines.Companies
that fail to take steps to secure data are viewed as less desirable
as business partners/vendors.
Private networks aren't.
Data sent over a service provider network, even
when the network is marketed as private, must also be secured by
being rendered unreadable, unusable, and undecipherable. Failure to
protect data in this way leaves it open, exposing it to theft,
replication, and unauthorized monitoring
SSL or tokenization provides transactional
security for front-end processes. Tokenization is limited to making
point-of-sale transactions more secure. You also need to protect
backend processes, such as network traffic between sites and data
centers. Front-end security protects your customers. Back-end
security protects the company.
Companies that fail audits are subject to
follow-ups and are forced to implement expensive remediation plans.
Even companies using so called “private” networks are learning that
auditors are looking for open Internet gateways on transport
networks. MPLS providers make no assurances regarding data security
traveling over their backbones.
Security for Financial Companies
EncrypTight helps financial
organizations meet security requirements. It’s an innovative data
protection solution that provides high performance encryption over
any network .It gives you easy set-up,flexible deployment options,
and global control over policies and dynamic distribution of keys.
Secure Data Center Networking and Disaster Recovery
many other government regulations require that financial data be
encrypted in motion.
compliance with EncrypTight. It encrypts data at wire rates from
3-Mbps to 10-Gbps. With EncrypTight's unique variable speed
option, you only pay for the bandwidth you consume
PCI-Compliant Network Segmentation
enables you to maintain compliance by cryptographically
segmenting data within a network. Policies can be managed from a
single interface, even when connecting to third party networks
the flexibility to setup secure communication zones without
changing the network or disrupting operational performance.
EncrypTight gives you the ability to define and enforce security
policies based on VLANs or applications
Enterprise-Wide Policy Control
makes it easy to define and implement carrier independent data
security policies on any network or group of networks without
altering data flows, performance, availability, or carrier SLAs.
technology is also extensible to the cloud enabling financial
companies to take advantage of the cost and performance gains of
virtualized infrastructures, even for sensitive workloads.
For easy remote monitoring and control of four
RS-232, -422, or -485 devices over a LAN or WAN.
Rugged design for operation in a wide temperature
Complies with the IEC 61000-6-2 EMC generic
standard immunity for industrial environments.
IEC 60068-2-27 (shock) and 600068-2-6 (vibration)
NEMA TS-2 rated for use in transportation
Offers direct IP, virtual COM port, or paired modes
Features four DB9 serial ports for the
RS-232/422/485 device connections.
Has two RJ-45 ports
of 4-Port Hardened Serial Console Manager
Communicate easily with four serial devices via
your LAN or WAN.
Improves productivity and cut down on the amount of
time required to configure or troubleshoot serial devices
located in a remote location.
Eliminate visits to a distant site just to make a
minor change to a configuration.
A simple-to-install, No time-consuming setup is
Set it up to operate in one of three modes:
- In Direct IP Mode, you use TCP/IP or UDP/IP to
communicate directly with the serial devices.
- In Virtual COM Mode, you can communicate with the
devices via your network just as if they were connected to
physical COM ports.
- In Paired Mode, multiple serial devices can
communicate with one another using network tunneling.
The 4-Port Hardened Serial Server has four standard
DB9 serial ports for the device connections. Each serial port is
software selectable for RS-232, RS-422, or RS-485 (2- or 4-wire)
More Product information, drop us a mail : Marketing_in@blackbox.com
Enables you to locate your critical computing hardware in
a secure environment.
Extension distance is up to 492 feet (150 m) for a single
1920 x 1080 screen, depending on cable type.
Extension distance is 330 feet (100 m) for two 1920 x
1200 screens, or a single high resolution screen to 2560 x 1600.
Supports Mac Cinema Display (2560 x 1440).
USB 2.0 Hi-Speed for mass storage devices
Supports keyboard, mouse, tablet, and touchscreens,
S/PDIF, and analog audio
Advantages of KVM Dual-Head DisplayPort
Perfect digital video, real time control The system is uncompressed, sending every pixel of every
frame without loss
Single CATx cable Video, USB, and audio all pass along a single cable. A
second CATx cable is required for the Hi-Speed USB 2.0 extension and
increased video bandwidth.
Up to 492 feet (150 m) extension distances Distance is dependent on the monitor resolution, number
of monitors, cable type, and the number of connection breaks for patch
panels and wall plates.
USB 2.0 Enables connection of any USB human interface device from
mice and keyboards through to graphics tablets, jog wheels, joysticks
and 3D explorers, Mass storage devices, isochronous devices such as
webcams and headsets.
EDID management The system has intelligent EDID management to allow the
true characteristics of the monitor to be passed back to the
Plug and play This extender solution is plug-and-play. There is no need
for drivers or software to be installed.
Digital audio Supports the S/PDIF interface via an optical 3.5mm jack
HD-quality analog audio HD-audio quality (stereo channel 24 bit sampled at 96kHz)
is available to transfer audio from local to remote for Line In /
Line. Headsets with integrated microphone use cases are also